Official Online Store

Micro Lights - Aircraft Version


Now Available!
These units are Shipping within 2-8 Days

The Micro Light Controller has 16 LED Channels (2x as the mini light controller) that simulate functions of aircraft lights. Thses units come pre-programmed with many of the most popular functions.

Note: Aircraft Version only has one single wire.

Hookup and Calibration:
The aircraft version of the Micro Light Controller plugs into a spare channel of your airplane's or heli's receiver.
The unit needs to have a three position toggle for best results. MORE DETAILS ON OUT YOUTUBE VIDEO BELOW.

LED Functions:
The toggle switch has three position: Left = All Off, Center = Flight, Right = Landing.
Constant Lights - ON in the flight and landing toggle positions.
Landing Lights - Only ON in the landing toggle position.
Blink - Flashes symmetrically ON then OFF.
Triple Strobe - Fast triple strobe. Flashes alternating from each other (A or B) or at both times (A+B)

Mini Light Controller Hookup Chart

LED Pinouts:
(Port) Function - Description
(1) Constant - Wing Logo
(2) Constant - Wing Logo
(3) Constant - Red/Grn Nav
(4) Constant - Red/Grn Nav
(5) Landing - Nose
(6) Landing - Nose
(7) Triple Strobe A
(8) Triple Strobe A
(9) Triple Strobe A+B
(10) Triple Strobe A+B
(11) Landing - Wing
(12) Landing - Wing
(13) Blink - Bottom Beacon
(14) Blink - Top Beacon
(15) Constant - Tail Logo
(16) Constant - Tail Logo

LED Hookup:
See the hookup chart link above.
Wire each led the the Micro Light Controller with Positive Lead on the Top and Negative Lead on the Bottom. You may solder to the unit pins, or use wire plugs.

Technical Specs:
Servo Wires: 1 Female
LED Ports: 16 LED Ports
Size: 1.5" x 1.0"
Weight: TBA

Micro Lights Functions and Hookup Video
Overview of the Micro Light Controller (NOT THE AIRCRAFT VERSION)

Add to Cart:

  • Model: Micro Airplane
  • 3 Units in Stock

This product was added to our catalog on Monday 05 April, 2010.

Your IP Address is:
Copyright © 2017 Punk RC. Powered by Zen Cart